Cane Crono PCA Pump
The Cane Crono PCA pump is an advanced model designed to meet the needs of critical Central Line, Intravenous and Intrathecal infusion therapies. This model has the well established mechanical properties of the Standard Crono Models, but with much more sophisticated flow management and safety controls compatible with the more critical application areas. The plunger incorporates an anti-free flow design for safe infusion.
This pump has recently been adopted as the pump of choice for the treatment of Pulmonary Hypertension by leading UK hospitals.
The pump is small and lightweight and most suitable for any application where maximum mobility is a prime concern, coupled with a high level of robustness and safety.
77 x 47 x 29mm
115g (Battery Included)
CR 123A 3V Lithium (Approx 6 months battery life)
Dedicated 10 or 20ml Syringe (Program selectable)
Drug volume may be pre-set from 1 to 20ml with 1ml increments
Programmable from 0.05 to 5.00 ml/hr
Programmable from 0.02 to 0.99 with 0.022 ml increments
Minimum interval between bolus
Programmable from 5 minutes to 24 hours
Number of boluses
Programmable for unlimited, or from 1 to 24 per day
Flow rate accuracy
Maximum Occlusion Pressure
4.5 bar +/- 1
Selected data is automatically stored in pump memory, and is not lost when battery is removed.
Keyboard lock may be enabled to prevent unauthorised changes in programme parameters
You may get more detailed information by visiting the Cane web site at www.microjet.it.